|
|
Products |
|
Kane May KM900 Hand-Held
Flue Gas Analyzer. Kane May
introduces its hand-held analyzer for domestic and industrial gas
measurement. They operate on all boiler types and display 8
parameters simultaneously. It can store up to 200 readings and can
transfer data to a printer or PC. There are four models to choose
from; all measure oxygen, calculate carbon dioxide, boiler
efficiency, excess air and losses. The KM900CO/P additionally
measures carbon monoxide and calculates the "poison index". The
KM900NO/P measures nitrous oxide and calculates NOx. And the
KM900COH/P measures CO with a hydrogen compensated sensor for
increased accuracy and range. All analyzers include a standard
flue probe, an integral water trap and particle filter, a rubber
sleeve, battery charger, manual, and carrying case. Options
include a flue probe, an infra-red printer, and a pressure sensor
to measure flue draught. Pre-programmed fuels include natural gas,
Town gas, Gascor, Light and heavy oil, propane, butane,
anthracite, Coke, and coal. Warranty is 12 months from date of
purchase.
See also Kane-May's
QUINTOX combustion analyzer.
For technical documentation, click
here
 ATC's Series 701
1/16 DIN Analog Temperature Controller (not exactly as shown).
ATC introduces a very easy to use, and inexpensive, on-off control
for heating applications (reverse-acting) for temperatures from 50
to 1300 degrees F. The control uses either a J or type K
thermocouple and output is a SPDT relay. LED display shows power
and relay "on". The 701 controller mounts in an 8-pin round socket
and can be panel mounted, and is only 48mm square. It's supply
voltage can be either 120/60 or 240/60 AC, and is available in
four temperature ranges. Setting the on/off point couldn't be
easier, just turn the dial on the front of the control. It's in
stock now.
 Belimo Damper
Actuators- Belimo offers a huge variety of damper
actuators for any HVAC system, all in their distinctive orange
colour. Belimo's actuators offer many benefits such as quick
installation, pre-wiring, compatability with leading makers of
control equipment, add on accessories such as auxiliary switches
and feedback potentiometers, mounting accessories for valve
linkages, torque ranges from 35 to 266 in-lbs, and rugged
durability. Belimo has a wide range of actuators of all sizes,
both in spring return and non-spring-return, for open/close or
proportional action, for damper areas of 8 square feet up to 70
sq. feet, and in 24V or 120V operation.
Pacific Controls carries a large stock of Belimo damper
actuators, and also stocks 1" to 2" Neo
ball valves powered by Belimo
actuators.
Belimo is an ISO 9001 registered company; for more information
check out their web-site at
www.belimo.com
 ASCO
introduces its new "Posiflow" Valve Series (click on
picture for detail). These are 2-way direct acting proportional
solenoid valves in which flow is directly related to the
electrical input. As input increases, so does the flow, and vice
versa. Flow can be adjusted from 0% to 100% of the valve's
capacity. The electrical input can be provided by the ASCO
Electronic Control Unit, or a similar circuit, which is plugged
directly into the valve via a DIN connector to provide three
different types of control: 0-10 VDC, 0-20mA, or 4-20mA.
Posiflow valves can be used in any domestic or industrial
application where the flow of gas or air must be controlled, and
can also work in situations where the flow of a licquid is
required. Valves are available in both brass and stainless steel
bodies, 1/4" or 3/8" pipe, with an operating pressure differential
of 15-230psi. Standard supply voltage is 24VDC. Phone us for more
information at 1-800-661-0173 or
(604) 879-6711.
Also check out
ASCO's timer operated
valves.
 Partlow's MRC Series
Chart Recorders - Pacific Controls has been selling
Partlow chart recorders for many years, for both recording
temperature, humidity, pressure, flow, etc., or for controlling
these processes. Shown is the MRC 8000 one and two pen 12" circle
chart recorder, with the new optional 4-20mA output contacts for
the highest resolution and accuracy available in a recorder of
this type. A large LED display for each pen is included, as well
as keypad access with the cover closed, making this recorder easy
to read and access. Up to 4 relay or SSR Driver outputs are
available, or up to two 4020mA outputs. Optional capabilities
include transmitter power supply, 5A relay outputs, auxiliary
inputs for remote setpoints, RS-485 communications, door lock, and
NEMA 4X enclosure.
|
|
